MapClerk

FAA 7460-1 › Vermont ›

Building or using a crane near Deerfield Valley Rgnl (4V8)?

Deerfield Valley Rgnl in West Dover, Vermont is a public-use airport. Under 14 CFR 77.9, anything within 10,000 feet of its runways that rises above a 50:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.

No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406

How tall can you build near 4V8 without filing?

The notice surface rises 1 foot for every 50 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 1,948 ft above sea level:

Distance from nearest runwayNotice required above (height over 1,948 ft)…which is this elevation (AMSL)
250 ft5 ft1,953 ft
500 ft10 ft1,958 ft
1,000 ft20 ft1,968 ft
2,000 ft40 ft1,988 ft
3,000 ft60 ft2,008 ft
5,000 ft100 ft2,048 ft
7,500 ft150 ft2,098 ft
10,000 ft200 ft2,148 ft
Beyond 10,000 ftOnly the 200-ft-above-ground rule applies (77.9(a))

If your ground is lower than 1,948 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.

Runways and notice boundary

5,000 ftN

Dashed line: the 10,000-ft area where the 50:1 notice slope applies; inner line: 5,000 ft.

RunwayLengthEnd elevations (ft AMSL)
01/192,650 ft1948 / 1950

Filing Form 7460-1 near 4V8

More: Do I need to file Form 7460-1? · Cranes and Form 7460-1

Other public-use airports nearby

Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.