Building or using a crane near Greenwood County (GRD)?
Greenwood County in Greenwood, South Carolina is a public-use airport. Under 14 CFR 77.9, anything within 20,000 feet of its runways that rises above a 100:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.
No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406
How tall can you build near GRD without filing?
The notice surface rises 1 foot for every 100 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 618 ft above sea level:
| Distance from nearest runway | Notice required above (height over 618 ft) | …which is this elevation (AMSL) |
|---|---|---|
| 250 ft | 2 ft | 620 ft |
| 500 ft | 5 ft | 623 ft |
| 1,000 ft | 10 ft | 628 ft |
| 2,000 ft | 20 ft | 638 ft |
| 3,000 ft | 30 ft | 648 ft |
| 5,000 ft | 50 ft | 668 ft |
| 7,500 ft | 75 ft | 693 ft |
| 10,000 ft | 100 ft | 718 ft |
| 15,000 ft | 150 ft | 768 ft |
| 20,000 ft | 200 ft | 818 ft |
| Beyond 20,000 ft | Only the 200-ft-above-ground rule applies (77.9(a)) | |
If your ground is lower than 618 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.
Runways and notice boundary
Dashed line: the 20,000-ft area where the 100:1 notice slope applies; inner line: 5,000 ft.
| Runway | Length | End elevations (ft AMSL) |
|---|---|---|
| 05/23 | 3,600 ft | 627.6 / 617.7 |
| 09/27 | 5,001 ft | 628.8 / 620.3 |
Filing Form 7460-1 near GRD
- File online through the FAA's OE/AAA system at least 45 days before construction or before applying for a building permit, whichever is first. Filing is free.
- You need NAD 83 coordinates, site ground elevation, structure height above ground and above sea level.
- Construction on airport property always needs notice, whatever the height.
More: Do I need to file Form 7460-1? · Cranes and Form 7460-1
Other public-use airports nearby
- LUX — Laurens County (19 nm)
- S19 — Mc Cormick County (21 nm)
- EOE — Newberry County (26 nm)
- 6J4 — Saluda County (26 nm)
- AND — Anderson Rgnl (31 nm)
- GYH — Donaldson Fld (32 nm)
Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.