MapClerk

FAA 7460-1 › Montana ›

Building or using a crane near Hinsdale (6U5)?

Hinsdale in Hinsdale, Montana is a public-use airport. Under 14 CFR 77.9, anything within 10,000 feet of its runways that rises above a 50:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.

No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406

How tall can you build near 6U5 without filing?

The notice surface rises 1 foot for every 50 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 2,185 ft above sea level:

Distance from nearest runwayNotice required above (height over 2,185 ft)…which is this elevation (AMSL)
250 ft5 ft2,190 ft
500 ft10 ft2,195 ft
1,000 ft20 ft2,205 ft
2,000 ft40 ft2,225 ft
3,000 ft60 ft2,245 ft
5,000 ft100 ft2,285 ft
7,500 ft150 ft2,335 ft
10,000 ft200 ft2,385 ft
Beyond 10,000 ftOnly the 200-ft-above-ground rule applies (77.9(a))

If your ground is lower than 2,185 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.

Runways and notice boundary

5,000 ftN

Dashed line: the 10,000-ft area where the 50:1 notice slope applies; inner line: 5,000 ft.

RunwayLengthEnd elevations (ft AMSL)
07/252,200 ft2203 / 2188
10/282,160 ft2192 / 2185
16/341,960 ft2190 / 2220

Filing Form 7460-1 near 6U5

More: Do I need to file Form 7460-1? · Cranes and Form 7460-1

Other public-use airports nearby

Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.