FAA 7460-1 › Missouri ›
Building or using a crane near Campbell Muni (34M)?
Campbell Muni in Campbell, Missouri is a public-use airport. Under 14 CFR 77.9, anything within 10,000 feet of its runways that rises above a 50:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.
No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406
How tall can you build near 34M without filing?
The notice surface rises 1 foot for every 50 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 283 ft above sea level:
| Distance from nearest runway | Notice required above (height over 283 ft) | …which is this elevation (AMSL) |
|---|---|---|
| 250 ft | 5 ft | 288 ft |
| 500 ft | 10 ft | 293 ft |
| 1,000 ft | 20 ft | 303 ft |
| 2,000 ft | 40 ft | 323 ft |
| 3,000 ft | 60 ft | 343 ft |
| 5,000 ft | 100 ft | 383 ft |
| 7,500 ft | 150 ft | 433 ft |
| 10,000 ft | 200 ft | 483 ft |
| Beyond 10,000 ft | Only the 200-ft-above-ground rule applies (77.9(a)) | |
If your ground is lower than 283 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.
Runways and notice boundary
Dashed line: the 10,000-ft area where the 50:1 notice slope applies; inner line: 5,000 ft.
| Runway | Length | End elevations (ft AMSL) |
|---|---|---|
| 18/36 | 3,000 ft | 283 / 284 |
Filing Form 7460-1 near 34M
- File online through the FAA's OE/AAA system at least 45 days before construction or before applying for a building permit, whichever is first. Filing is free.
- You need NAD 83 coordinates, site ground elevation, structure height above ground and above sea level.
- Construction on airport property always needs notice, whatever the height.
More: Do I need to file Form 7460-1? · Cranes and Form 7460-1
Other public-use airports nearby
- M85 — Gideon Meml (6 nm)
- MAW — Malden Rgnl (7 nm)
- TKX — Kennett Meml (16 nm)
- DXE — Dexter Muni (18 nm)
- EIW — County Meml (20 nm)
- M28 — Mid Continent (21 nm)
Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.