MapClerk

FAA 7460-1 › Michigan ›

Building or using a crane near Gladwin Zettel Meml (GDW)?

Gladwin Zettel Meml in Gladwin, Michigan is a public-use airport. Under 14 CFR 77.9, anything within 20,000 feet of its runways that rises above a 100:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.

No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406

How tall can you build near GDW without filing?

The notice surface rises 1 foot for every 100 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 764 ft above sea level:

Distance from nearest runwayNotice required above (height over 764 ft)…which is this elevation (AMSL)
250 ft2 ft767 ft
500 ft5 ft769 ft
1,000 ft10 ft774 ft
2,000 ft20 ft784 ft
3,000 ft30 ft794 ft
5,000 ft50 ft814 ft
7,500 ft75 ft839 ft
10,000 ft100 ft864 ft
15,000 ft150 ft914 ft
20,000 ft200 ft964 ft
Beyond 20,000 ftOnly the 200-ft-above-ground rule applies (77.9(a))

If your ground is lower than 764 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.

Runways and notice boundary

5,000 ftN

Dashed line: the 20,000-ft area where the 100:1 notice slope applies; inner line: 5,000 ft.

RunwayLengthEnd elevations (ft AMSL)
09/274,699 ft771.3 / 772.7
15/332,580 ft772.7 / 764.3

Filing Form 7460-1 near GDW

More: Do I need to file Form 7460-1? · Cranes and Form 7460-1

Other public-use airports nearby

Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.