MapClerk

FAA 7460-1 › Michigan ›

Building or using a crane near Moorestown Airpark (6Y0)?

Moorestown Airpark in Moorestown, Michigan is a public-use airport. Under 14 CFR 77.9, anything within 10,000 feet of its runways that rises above a 50:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.

No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406

How tall can you build near 6Y0 without filing?

The notice surface rises 1 foot for every 50 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 1,201 ft above sea level:

Distance from nearest runwayNotice required above (height over 1,201 ft)…which is this elevation (AMSL)
250 ft5 ft1,206 ft
500 ft10 ft1,211 ft
1,000 ft20 ft1,221 ft
2,000 ft40 ft1,241 ft
3,000 ft60 ft1,261 ft
5,000 ft100 ft1,301 ft
7,500 ft150 ft1,351 ft
10,000 ft200 ft1,401 ft
Beyond 10,000 ftOnly the 200-ft-above-ground rule applies (77.9(a))

If your ground is lower than 1,201 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.

Runways and notice boundary

5,000 ftN

Dashed line: the 10,000-ft area where the 50:1 notice slope applies; inner line: 5,000 ft.

RunwayLengthEnd elevations (ft AMSL)
03/212,800 ft1201 / 1203
09/272,600 ft1205 / 1210

Filing Form 7460-1 near 6Y0

More: Do I need to file Form 7460-1? · Cranes and Form 7460-1

Other public-use airports nearby

Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.