MapClerk

FAA 7460-1 › Maryland ›

Building or using a crane near Joint Base Andrews (ADW)?

Joint Base Andrews in Camp Springs, Maryland is a public-use military airport. Under 14 CFR 77.9, anything within 20,000 feet of its runways that rises above a 100:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.

No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406

How tall can you build near ADW without filing?

The notice surface rises 1 foot for every 100 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 252 ft above sea level:

Distance from nearest runwayNotice required above (height over 252 ft)…which is this elevation (AMSL)
250 ft2 ft254 ft
500 ft5 ft257 ft
1,000 ft10 ft262 ft
2,000 ft20 ft272 ft
3,000 ft30 ft282 ft
5,000 ft50 ft302 ft
7,500 ft75 ft327 ft
10,000 ft100 ft352 ft
15,000 ft150 ft402 ft
20,000 ft200 ft452 ft
Beyond 20,000 ftOnly the 200-ft-above-ground rule applies (77.9(a))

If your ground is lower than 252 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.

Runways and notice boundary

5,000 ftN

Dashed line: the 20,000-ft area where the 100:1 notice slope applies; inner line: 5,000 ft.

RunwayLengthEnd elevations (ft AMSL)
01L/19R11,301 ft252.8 / 275.5
01R/19L9,756 ft251.8 / 277.1

Filing Form 7460-1 near ADW

More: Do I need to file Form 7460-1? · Cranes and Form 7460-1

Other public-use airports nearby

Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.