FAA 7460-1 › Indiana ›
Building or using a crane near Boonville (I91)?
Boonville in Boonville, Indiana is a public-use airport. Under 14 CFR 77.9, anything within 10,000 feet of its runways that rises above a 50:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.
No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406
How tall can you build near I91 without filing?
The notice surface rises 1 foot for every 50 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 390 ft above sea level:
| Distance from nearest runway | Notice required above (height over 390 ft) | …which is this elevation (AMSL) |
|---|---|---|
| 250 ft | 5 ft | 395 ft |
| 500 ft | 10 ft | 400 ft |
| 1,000 ft | 20 ft | 410 ft |
| 2,000 ft | 40 ft | 430 ft |
| 3,000 ft | 60 ft | 450 ft |
| 5,000 ft | 100 ft | 490 ft |
| 7,500 ft | 150 ft | 540 ft |
| 10,000 ft | 200 ft | 590 ft |
| Beyond 10,000 ft | Only the 200-ft-above-ground rule applies (77.9(a)) | |
If your ground is lower than 390 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.
Runways and notice boundary
Dashed line: the 10,000-ft area where the 50:1 notice slope applies; inner line: 5,000 ft.
| Runway | Length | End elevations (ft AMSL) |
|---|---|---|
| 09/27 | 2,300 ft | 395 / 390 |
Filing Form 7460-1 near I91
- File online through the FAA's OE/AAA system at least 45 days before construction or before applying for a building permit, whichever is first. Filing is free.
- You need NAD 83 coordinates, site ground elevation, structure height above ground and above sea level.
- Construction on airport property always needs notice, whatever the height.
More: Do I need to file Form 7460-1? · Cranes and Form 7460-1
Other public-use airports nearby
- EVV — Evansville Rgnl (10 nm)
- 3EV — Skylane (13 nm)
- HNB — Huntingburg (21 nm)
- TEL — Perry County Muni (30 nm)
- DCY — Daviess County (40 nm)
- FRH — French Lick Muni (42 nm)
Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.