FAA 7460-1 › Iowa ›
Building or using a crane near Anita Muni-kevin Burke Meml Fld (Y43)?
Anita Muni-kevin Burke Meml Fld in Anita, Iowa is a public-use airport. Under 14 CFR 77.9, anything within 10,000 feet of its runways that rises above a 50:1 slope needs FAA Form 7460-1 at least 45 days before construction. Check your exact site free.
No address handy? Try 16700 Saticoy St, Van Nuys, CA 91406
How tall can you build near Y43 without filing?
The notice surface rises 1 foot for every 50 feet of horizontal distance from the nearest point of the nearest runway, starting at the runway's elevation. Using the lowest runway-end elevation, 1,240 ft above sea level:
| Distance from nearest runway | Notice required above (height over 1,240 ft) | …which is this elevation (AMSL) |
|---|---|---|
| 250 ft | 5 ft | 1,245 ft |
| 500 ft | 10 ft | 1,250 ft |
| 1,000 ft | 20 ft | 1,260 ft |
| 2,000 ft | 40 ft | 1,280 ft |
| 3,000 ft | 60 ft | 1,300 ft |
| 5,000 ft | 100 ft | 1,340 ft |
| 7,500 ft | 150 ft | 1,390 ft |
| 10,000 ft | 200 ft | 1,440 ft |
| Beyond 10,000 ft | Only the 200-ft-above-ground rule applies (77.9(a)) | |
If your ground is lower than 1,240 ft you can build taller by the difference; if it's higher, less. Cranes count at their maximum height. The free check above uses USGS ground elevation for your exact spot.
Runways and notice boundary
Dashed line: the 10,000-ft area where the 50:1 notice slope applies; inner line: 5,000 ft.
| Runway | Length | End elevations (ft AMSL) |
|---|---|---|
| 05/23 | 2,825 ft | 1240 / 1240 |
Filing Form 7460-1 near Y43
- File online through the FAA's OE/AAA system at least 45 days before construction or before applying for a building permit, whichever is first. Filing is free.
- You need NAD 83 coordinates, site ground elevation, structure height above ground and above sea level.
- Construction on airport property always needs notice, whatever the height.
More: Do I need to file Form 7460-1? · Cranes and Form 7460-1
Other public-use airports nearby
- AIO — Atlantic Muni (13 nm)
- GFZ — Greenfield Muni (16 nm)
- ADU — Audubon County (17 nm)
- GCT — Guthrie County Rgnl (21 nm)
- CRZ — Corning Muni (27 nm)
- HNR — Harlan Muni (27 nm)
Source: FAA airport, runway and runway-end data (NASR cycle effective 2026/10/01). Screening only — the FAA issues determinations.